Sort By
$
sample42

10-Pack Replacement Blades for EZ-RJPRO HD Crimp Tool

$
sample42

4 Way, 12 Point Indent Crimp Tool for 20-26 AWG

$
sample42

BNC-Type Nickel SealSmart Coaxial Compression Connectors

$
sample42

EXO-EX Die™ for EXO Crimp Frame®

$
sample42

EXO-EX Die™ Replacement Blade

$
sample42

External Ground Crimp Tool

$
sample42

Eye Lag Screw - 1/4

$
sample42

EZ-RJ45® CAT5/5e Connectors

$
sample42

EZ-RJ45® CAT6 Strain Relief

$
sample42

EZ-RJ45® Die for EXO Crimp Frame

$
sample42

EZ-RJ45® Die Replacement Blade

$
sample42

Fault Trapper™ Arc Fault Circuit Tester and Fault Locator

$

10-Pack Replacement Blades for EZ-RJPRO HD Crimp Tool

You spoke, we listened! Introducing our new 10 pack of replacement RJ45 blades for the EZ-RJPRO HD crimp tool. Now you'll always have a sharp blade when you need it most.

$

4 Way, 12 Point Indent Crimp Tool for 20-26 AWG

The 4-Way Indent Crimp Tools provide either 8 point or 12 point indent crimping on solid barrel contacts for a higher level of reliability and greater pull strength. Indent dies are precision machined from tool steel and heat treated for long life. Tool has a full cycle ratchet mechanism and includes built-in contact locator. An economical alternative to mil spec (MS22520) approved crimping tools.

  • 4-Way or 12 point indents.
  • For use on solid barrel type contacts used in RS232 style connectors.
  • For use on BNC/TNC solid barrel center contacts.

$

BNC-Type Nickel SealSmart Coaxial Compression Connectors

Platinum Tools' SealSmart Compression Connectors provide simple, fast and reliable terminations. The perfect solution for CATV, DSS, Security, Home Theater and Residential Structured wiring installations.

$

EXO-EX Die™ for EXO Crimp Frame®

The patented EXO-EX Die™ is used with the EXO Crimp Frame™ to terminate ezEX-RJ45™connectors (typically used in Cat6 and Cat6A). The EXO-EX Die is interchangeable and reversible when used with EXO Crimp Frame. Designed for the new ezEX-RJ45™connectors (ezEX™44 and ezEX™48). The ezEX-RJ45™ connectors are an RJ45 pass through connector, developed for larger cables and conductors. Integrated Hi-Lo stagger for improved performance and one piece design pass through system.

  • Single cycle crimp and flush trim
  • Easily interchangeable
  • Reversible for ambidextrous operation
  • Connectors lock into tool for correct positioning during crimp
  • Compatible with ezEX™44 and ezEX™48 connectors
  • Terminates larger cables and conductors Cat6 and Cat6A

$

EXO-EX Die™ Replacement Blade

Replacement blade specifically for the EXO-EX Die™. A sharp blade assures your tool will neatly trim the wire from the ends of the connectors for crisp, clean crimps every time. Always have a spare on hand.

  • Replacing blade improves the prefomance of your termination
  • Compatible with EXO-EX Die™ only
  • Qty 2

$

External Ground Crimp Tool

Perform 360° crimps on the external ground tab of shielded RJ45 connectors. Tool design allows the installer to perform a concentric termination with full control, preventing over/under crimping the external ground tab.

$

Eye Lag Screw - 1/4

Hang ceiling wire & jack chain, threaded rod and eye lag screws. Our hardware is designed for the most efficient, secure and cost effective solution.

$

EZ-RJ45® CAT5/5e Connectors

The patented EZ-RJ45® Connector simplifies twisted pair terminations by allowing the wires to be inserted through the connector and out the front. This allows the technician to easily verify the proper wiring order. Electrical performance of the termination is optimized by pulling the connector down over the cable jacket and seating it tightly in the rear of the connector. Reducing the distance between the wire twists and contacts improves performance! Reduces scrap, no wasted crimps. More reliable, higher performance. Crimp with the patented EZ-RJ45 Crimp Tool...crimps and trims in one cycle. Manufactured in the USA. Patented.

$

EZ-RJ45® CAT6 Strain Relief

The innovative Snag Proof Strain Relief is designed specifically to be crimped with the EZ-RJ45® plugs. The primary strain relief of the plug locks the snag proof strain relief in place so they will not pull off, creating one, integral assembly. Once crimped, this design allows the plug's primary strain relief to relax slightly, preventing the cable pairs from being over compressed. This decrease in stress contributes to achieving peak performance. The tab on the strain relief is designed to extend over the plug's locking tab, making it snag proof when administering patch cords.

$

EZ-RJ45® Die for EXO Crimp Frame

The patented EZ-RJ45® Die is used with the EXO Crimp Frame™ to terminate EZ-RJ45® connectors. The EZ-RJ45® Die is interchangeable and reversible when used with EXO Crimp Frame™. Designed for the original pass through EZ-RJ45® connectors which have been a standard in this industry for many years.

  • Single cycle crimp and flush trim
  • EZ-RJ45® Die is easily interchangeable
  • Reversible EZ-RJ45® Die for ambidextrous operation
  • Connectors lock into tool for correct positioning during crimp
  • Compatible with EZ-RJ45 connectors: EZ-RJ45 Cat5e and Cat6, Shielded Cat5e and Cat6 connectors (internal and external ground)

$

EZ-RJ45® Die Replacement Blade

Replacement blade specifically for the EZ-RJ45® Die. A sharp blade assures your tool will neatly trim the wire from the ends of the connectors for crisp, clean crimps every time. Always have a spare on hand.

  • Replacing blade improves the performance of your termination
  • Compatible with EZ-RJ45® Die
  • Qty 2

$

Fault Trapper™ Arc Fault Circuit Tester and Fault Locator

Stop guessing about live circuit issues! For the first time, you can detect the type of fault and locate the position of an electrical fault that causes intermittent or persistent circuit breaker trips, thus giving you the critical information needed to reduce call backs for circuit breaker trips.

The Fault Trapper is a new class of tester using Spread Spectrum Time Domain Reflectometry (SSTDR) to monitor energized circuits. Running on in-line power for extended battery life, it captures time and distance to Intermittent Opens, Shorts and Arc Faults saving the event information in memory for later investigation. The in-line 40 Amp Module isolates the circuit being monitored from the breaker panel and all other breakers. The last faults can be viewed off-line using the back-up battery.

Fault Trapper allows unattended monitoring of energized dedicated circuits to locate fault on the line. Connect the Fault Trapper to your circuit, press the Test button to begin monitoring and walk away. Come back later or the next day to find out the why-when-and-where’s faults are occurring on the circuit and causing the circuit breaker to trip.

  • In-line monitoring of energized dedicated circuits up to 300 VAC and 40 amps
  • Allows unattended monitoring for intermittent faults
  • No Splicing - Plug in with existing wiring
  • Identifies intermittent opens, shorts and arc faults
  • Able to detect faults that circuit breaker may not
  • Runs on in-line power in monitor mode
  • Fault location reported as distance from the Fault Trapper in feet/meters
  • Easy-to-use three-button operation
  • Backlit LCD display for dark areas
  • Back-up battery allows capture of breaker trips/unpowered display of results
  • 300V CAT III, 120/240Vac, 40 amps or less, single phase